Best-PL 5176

medium viscous, good adhesion on glass, metals and synthetic materials, temperature resistant, flexible
Curing system: UVA-light
Viscosity: 1500
Chemical type: modified acrylate
Appearance:

BEST-PL 5176 is a one-component, solvent-free, adhesive based on a modified acrylic resin. One of its special features is its low odour.

BEST-PL 5176 cures by exposure to UV light with a wave length of 315 – 400 nm. At least one of the adherends has to be permeable to UVA-light. After sufficient exposure the product cures completely. Curing parameter depend on material thickness and absorption, adhesive layer thickness and absorption, type of lamp and the distance between light source and the adhesive film.

Due to its high viscosity and its good adhesion on glass, metals and synthetic materials BEST-PL 5176 is preferably used for bonding of those materials. Apply product on bonding surfaces, assemble parts and expose to UVA-light of appropriate wave length. The curing mechanism allows an adjustment of parts shortly after application but before exposure. The flexibility of the product makes tension-equalising bonding of materials with different thermal expansion coefficients possible.

BEST-PL 5176 is ready to use and can be applied directly from the original container or with suitable dosing units. Bonding surfaces should be dry and free of dust, grease and other contaminants.

Buy the Product

product inquiry for a sample to PL 5176

Only for commercial customers and for serial production.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden

Safety data sheet only available via email

  • This field is for validation purposes and should be left unchanged.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden