| low viscous, capillary, temperature resistant, good adhesion on glass, metals and synthetic material, suitalbe for subsequent bonding | |
| Curing system: | UVA-light |
| Viscosity: | 80 |
| Chemical type: | modified acrylate |
| Appearance: |  |
BEST-PL 5141 is a one-component, solvent-free, adhesive based on a modified acrylic resin.
BEST-PL 5141 cures by exposure to UVA light with a wave length of 300 – 400 nm. At least one of the adherends has to be permeable to UVA-light. After sufficient exposure the product cures completely. Curing parameter depend on material thickness and absorption, adhesive layer thickness and absorption, type of lamp and the distance between light source and the adhesive film.
Due to its low viscosity, its good optical features and its good adhesion on glass, metals and synthetic materials BEST-PL 5141 is preferably used for bubble-free bonding of those materials. The product also features excellent resistance against various chemicals. Apply product on bonding surfaces, assemble parts and expose to UVA-light of appropriate wave length. BEST-PL 5141 is also suitable for subsequent application. Due to the good capillary action the adhesive seeps into the bonding gap. The curing mechanism allows an adjustment of parts shortly after application but before exposure. The product is temperature resistant.
BEST-PL 5141 is ready to use and can be applied directly from the original container or with suitable dosing units. Bonding surfaces should be dry and free of dust, grease and other contaminants.
Buy the Productproduct inquiry for a sample to PL 5141
Only for commercial customers and for serial production.
Klicken Sie auf den unteren Button, um den Inhalt von zu laden.
Only for commercial customers and for serial production.
Klicken Sie auf den unteren Button, um den Inhalt von zu laden.
Safety data sheet only available via email
Klicken Sie auf den unteren Button, um den Inhalt von zu laden.