Best-KL 6060

for bonding of synthetic materials and metals, for casting of electronic components, sealing of soldering contacts
Curing system: UVA-light
Viscosity: 2 000
Chemical type: modified epoxy resin
Final Strength: 24 hours
Fixture Time: 120 seconds
Appearance:
Data Sheets:
TDS

BEST-KL 6060 is a one-component, solvent free and medium viscous UVA-light curing adhesive based on a modified epoxy resin.

BEST-KL 6060 is suitable for the bonding of synthetic materials, metals and elastomers. It cures by exposure to UVA-light with a wave length of 280 – 320 nm. At least one of the adherends has to be permeable to UVA-light. It is temperature- and chemical resistant after cure. The product features a dry surface after cure and is therefore predestined for the casting of components in the field of electronics and for the sealing of soldering contacts in relays and plug connectors

BEST-KL 6060 combines high strength with good temperature and chemical resistance. It bridges gaps up to 1 mm, especially when subsequently exposing the excess adhesive. The product features slight “dark cure” properties and therefore will further cure in the dark but to a lesser extent.

Buy the Product

product inquiry for a sample to KL 6060

Only for commercial customers and for serial production.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden

Safety data sheet only available via email

  • This field is for validation purposes and should be left unchanged.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden