Best-CA 236

high viscous, temperature resistant, thixotropic, universal, elastic, black, bonding of rubber/synthetic materials, metals
Strength class: high strength
Curing system: humidity
Viscosity: 6000
Chemical type: ethyl-cyanoacrylate
Final Strength: 20 hours
Fixture Time: 10 - 15 seconds
Appearance:

BEST-CA 236 is a one-component, solvent free and impact resistant, black coloured cyanoacrylate adhesive based on ethyl-cyanoacrylate.

BEST-CA 236 is a special product for bonding of plastics, e.g. polyamide, PVC, PMMA and various elastomeres, e.g. rubber, EPDM and viton among each other.

BEST-CA 236 is very fast cure. After full cure the adhesive is high strength and temperature resistant. 

BEST-CA 236 is ready-to-use and can be applied from the original container. 

BEST-CA 236 is applied spot-wise or bead like. Assemble parts by using short, firm pressure. Curing process starts within seconds. On most materials fixture time is reached within
15 to 20 seconds. 85 % of final cure is reached after 30 minutes, 100% after 20 hours. The rate of cure depends on the ambient relative humidity. A relative humidity of 40 to 60% will lead to best results. Lower values may delay cure. 

Bonding surfaces must be dry, free of dust and grease as well as other contaminants. Sand-blasting, grinding and staining bonding surfaces will enhance adhesion on bonding surfaces.

CHEMICAL AND ENVIRONMENTAL RESISTANCE

BEST-CA adhesives show good resistance to changing climatic conditions and chemical influences.

Buy the Product

product inquiry for a sample to CA 236

Only for commercial customers and for serial production.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden

Safety data sheet only available via email

  • This field is for validation purposes and should be left unchanged.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden