Best-CA 224

medium viscous, high strength, temperature resistant, universal, for bonding of metals, synthetic materials and ceramics
Strength class: high strength
Curing system: humidity
Viscosity: 400
Chemical type: ethyl-cyanoacrylate
Final Strength: 20 hours
Fixture Time: 10 - 15 seconds
Appearance:

BEST-CA 224 is a one-component, solvent free cyanoacrylate adhesive based on ethyl-cyanoacrylate. 

BEST-CA 224 is the standard product for bonding of plastics, e.g. polyamide, PVC, PMMA and various elastomeres, e.g. rubber, EPDM and viton amongst each other and with metals and ceramics. 

BEST-CA 224 is very fast cure. After full cure the adhesive is high strength and temperature resistant. 

BEST-CA 224 is ready-to-use and can be applied from the original container. 

BEST-CA 224 is applied spot-wise or bead like. Assemble parts by using short, firm pressure. Curing process starts within seconds. On most materials fixture time is reached within 10 to 15 seconds. 85 % of final cure is reached after 30 minutes, 100% after 20 hours. The rate of cure depends on the ambient relative humidity. A relative humidity of 40 to 60% will lead to best results. Lower values may delay cure. 

Bonding surfaces must be dry, free of dust and grease as well as other contaminants. Sand-blasting, grinding and staining bonding surfaces will enhance adhesion on bonding surfaces.

CHEMICAL AND ENVIRONMENTAL RESISTANCE

BEST-CA adhesives show good resistance to changing climatic conditions and chemical influences.

Buy the Product

product inquiry for a sample to CA 224

Only for commercial customers and for serial production.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden

Safety data sheet only available via email

  • This field is for validation purposes and should be left unchanged.

Klicken Sie auf den unteren Button, um den Inhalt von zu laden.

Inhalt laden